Vertical Finisher
|
AA03/ : Vertical Finisher
1 finisher each EUR 25.000,00
NSC, year 1987, type FMV30,16 heads heads each 2 slivers = 32 slivers on 16 tubes Ø 70 x 300 mm, automatic doffing, creel for cans Ø
700 x 1200 mm, exellent condition, still running.
1 finisher each EUR 17.500,00
the price is reduced to : EUR14.500,00 loaded.
NSC, year 1987, type FMV30, 12 heads each 2 slivers = 24 slivers on 12 tubes, ø 70 x 300 mm, autom. doffer, creel for cans ø 700 x 1200
mm
The prices are ex works.
The machines are in good condition.
***************************************************************************************************************************************************
AA30/ : 3 off NSC Schlumberger FMV32 Vertical Rubbing Frame Year 1988, 16 heads delivering 32 rovings on 16 bobbins
Automatic doffingPrice : £35,000 each FOT EU
This machine we can sell minimum £31,000 C +F Bandar Abbas below this figure we do not sell. Any commission you will
have to add to the price
NSC Schlumberger FMV 30 1984 Serial No 5778,12 heads delivering 24 rovings on 12 bobbins, Automatic doffing, including around 2,000
tubes, Price : £12,000 FOT EU
***************************************************************************************************************************************************
AA05/ : N.2 Finisher SCHLUMBERGER NSC Mod.FMV 42
-n.20 bobbins Each -tube L.320 mm. Diam.70 mm. -complete with automatic doffing -automatic
tube loader -creel 40 cans - year 2006 - 2007.
Each 160,000 Euro, Mill Floor
Location : EU
no. 1 Sant'Andrea vertical finisher mod. RF.2a, year 1994, 24 positions each, autodoffing and auto loading, tube 330 mm.
and one more machine,Price is Euro 58,500 C&F
No. 1 NSC Schlumberger vertical finisher mod. FMV.30, year 1987, 16 positions, automatic loading and doffing. C&F price : Euro 29,500
***************************************************************************************************************************************************
AA79/081209 : Vertical Finishers
NSC Schlumberger FMV 30 vertical finisher 12 heads for 24 ends single rub, year 1984,serial number 5778, 420mm pitch, maximum input
load 15 to 18g/m, roving weight 0.66 to 4 Nm, feed cylinder diameter 40mm, total nip 210-260mm adjustable by motorised quick set, 1
vertical rubbing zone 1100rubs/min, 4 to 6 rubs a meter, electronic stop motion, tubes 300mm length, maximum bobbin diameter 300mm,
delivery speed up to 220m/min,can creel, tubes, auto doffing. Price £ 10,000 ten thousand pounds loaded ex-EU.
NSC Schlumberger vertical finisher, FMV 32, year manufacture 1988, serial number 5994, Telemanique Altivar 5, series 01, 16 bobbins, 2
ends per bobbin. auto doffing. For doing roving count range 0.66 to 4 Nm. Will do wool and long staple chemical fibres. Will do between 5 to
8 rubs per meter. Working speed up to 1400 rubs/min. Delivery speed up to 250m/min.Bobbin will hold up to 4.5 kg of material, maximum
bobbin diameter 300mm. Frequency inverter drive. Draft range from 7.2 to 20.7. Total nip range 215-260mm. Installed power 22.5KW. Total
weight of machine 9,200kg.length machine 9.82 meters.Price £ 35,000 thirty five thousand loaded ex-EU.
NSC Schlumberger vertical finisher, FMV 32, year manufacture 1988, serial number 6018, series 01, 16 bobbins, 2 ends per bobbin. auto
doffing. For doing roving count range 0.66 to 4 Nm. Will do wool and long staple chemical fibres. Will do between 5 to 8 rubs per meter.
Working speed up to 1400 rubs/min. Delivery speed up to 250m/min. Bobbin will hold up to 4.5 kg of material, maximum bobbin diameter
300mm. Frequency inverter drive. Draft range from 7.2 to 20.7. Total nip range 215-260mm.220/380V 50 Hz 15 Kw main motor Siemens
Simovert . Installed power 22.5KW. Total weight of machine 9,200kg. length machine 9.82meters. Price £ 35,000 thirty five thousand loaded
ex-EU.
***************************************************************************************************************************************************
AA10/071209 : Vertical Finisher
1 "NSC" vertical Finisher type FMV 10 year 1981, 12 positions
1 "NSC" finisher type FM7A year 1989, 12 spindles, 24 slivers, tubes 235 mm
**************************************************************************************************************************************************
NSC Schumberger vertical finisher
Reduced Price : $36,500 FOT
Quantity :1 Price : $39,500
NSC Schlumberger vertical finisher mod. FMV.30, year 1987, 16 positions, automatic loading and doffing
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA05/020110(RSLII-DF)-7
AA05/090210(RTLII-DF)
***************************************************************************************************************************************************
NSC SCHLUMBERGER ( Photo )
Quantity : 1
year :1982
Type : FMV10
16 heads each 2 slivers = 32 slivers on 16 tubes Ø 70 x 300 mm, automatic doffing, creel for 32 cans
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA03/240210(Package CYIII-EF)-N Part of Gillbox and Finisher
**************************************************************************************************************************************************
Sant’Andrea horizontal finisher
Quantity :1 Price : $3,000 FOT
Sant’Andrea horizontal finisher mod. SF.16, year 1981, 16 positions, automatic loading and doffing
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA05/090210(RIII-DF)-7
**************************************************************************************************************************************************
|
|
