Semi Worsted Machines
|
|
|
AA05/ : Semi Worsted Spinning Machines, Ring Diam 75mm
Quantity : 2
2 Ring Spinning m/c DELPIANO Semi-worsted type Mod. FD.106 - 240 spindles each one – year 1995 –
traverse 120 mm. – ring diam. 75 mm. – h. tube 350 mm. – double draft with Sampre 6 C rollers –
automatic doffing – feeding by cans or bobbins by finisher .
C&F unit price : euro 39,500.-
**********************************************************************************************************************************************
AA05/ : Yarn Spinning Laboratory
M/C NAME MAKER TYPE YEAR SET REMARK
Yarn Strength Tester SHIKIBO ST-2000 1991 1 PRINTER SEIKOSHA SP-1600 AI INCLUDE
Auto Yarn Count Tester SHIKIBO MB8Z-B3 1991 1 PRINTER SEIKOSHA SP-2000 Balance FA200
INCLUDE
Auto twist Counter SHIKIBO TC-50 1991 1 PRINTER SEIKOSHA SP-2000 INCLUDE
Oil Extraction Tester WIRA 1991 1
Uster Tester 3 ZELLWEGER UT3-SP 1991 1
Auto Airconditioner HANWOOL 15000UDA 1992 1
Hairiness Tester ZWEIGLE G565 1991 1
Almer Peyer Ch-8832 1991 1
Wrap Reel Halifax 1991 1
Oven Dryer Halifax 1991 1
Classimat-ll Uster Zellweger Cmt2 kg/w 1991 1 Kamitus(Japan) W/D 6spindle include Uster printer
inculde
TOTAL : US$ 55,000
**********************************************************************************************************************************************
AA40/ : Ring Spinning
2 Semi Worsted Ringspinning Machines, NSC, Type CF 32, Year 1990, for direct spinning
out of cans, 256 spindles single sided, pitch 105 mm, ring-Ø 75 mm, tubes 360 mm,
2 drafting zones with ballon rollers and double aprons, automatic copsdoffer and tubefeeder,
creel for slivers out off cans Ø 500 x 1200 mm, still running
Price: Euro 68.350,- each Europe
**********************************************************************************************************************************************
AA05/ : Schlumberger
4 Schlumberger Link Spinning Frames
Model CF-53
408 Spindles
120mm Gauge
100mm x 9.2mm Ring
380mm Traverse
8 Roll Drafting
Auto Doff
Year: 2001
No. 1 Seydel 870, 1994, + Schlumberger re-breaker GC.14-R5L10, 1994
Price of the line usd. 108,000.-
No. 1 Seydel 870, 1994, + Schlumberger re-breaker GC.14-R5L10, 1994
Price of the line usd. 108,000.-
No. 9 Cognetex FTC.8L, 1994, 960 spindles each,
with duo-spun for lycra device, ring dia. 55 mm
Unit price usd. 40,000.-
No. 6 Suessen Fiomax2000, 1994, 960 spindles each, ring dia. 55 mm.
Unit price usd. 36,500.-
No. 6 Suessen Fiomax2000, 2/1996 + 4/1998, 960 spindles each, ring dia. 55 mm.
linked to No. 6 Savio Espero.I, 2/1997 + 4/1998, 24/26 heads each,
Unit price usd. 64,500.-
No. 6 Muratec 7-7, 1994, 60 heads each,
Unit price usd. 40,000.-
No. 2 Savio Espero-RS, 1994, 60 heads each,
Unit price usd. 49,500.-
No. 3 Savio, Geminis 302-BF, 1998, 144 spindles each,
Unit price usd. 29,500.-
No. 4 Zerbo reeling mcs GX.40, 1987, 20 pos. each side
Unit price usd. 3,500.-
No. 3 Benguerel hydroextractors H.14, 1994, basket dia. 1,000 mm.
Unit price usd. 4,000.-
No. 4 FADIS electronic hank-to-cone mcs Tuan/E.500, 1994, 35 heads each,
Unit price usd. 27,500.-
Cognetex rebreaker mod. SMC.400, year 1988, 16 cans feeding, cans delivery dia. 1000 x 1200 mm., automatic doffing
Price usd. 20,500.-
Savio winding machines mod. Ras.15-L, year 1986, 56 heads each, automatic doffing, Uster C.3 clearers, waxers,
6” delivery, 5°57’ conicity, Magitex blower
Unit price usd. 17,500.-
Murata winding machine mod. Mach-coner 7-2, year 1990, 50 heads, automatic doffing, Peyer PI.150 clearers, waxers,
6” delivery, 5°57’ conicity, Magitex blower
Price usd. 20,500.-
Murata winding machine mod. Mach-coner 7-2, year 1993, 20 heads,automatic doffing, Uster MKC.15 clearers, waxers,
6” delivery, 5°57’ conicity, Magitex blower
Unit price usd. 14,500.-
********************************************************************************************************************************************
AA05/ : Card Machines
1 Carding installation yoc 1989-1996, for processing of acrylic:
*nylon 2 den, 250 kgs./h.
*viscose 15 den, 500/600 kgs./h.
Composed of:
*1 ROLANDO Bale Opener yoc 1981.
*1 OMNI Blending box yoc 1983, w.width 3 mt. x lenght 10 mt. x h.4,5 mt.
*1 GAMBA Willow Card yoc 1975, width 1000 mm.
*1 OCTIR Card mod.TITANUS yoc 1983, chute feed, width 3500 mm., 2 drums dia.2000 mm., 5 workers, 2 doffers dia.750 mm., rotary
Imat reducing head, delivery 1 can 1000x1200 mm.
*1 COGNE Gill box mod.SC-400E 11 BA yoc 1992, electronic autoleveller, feeding creel 4x2=8 cans, delivery 1 bobbin, autom. change.
*1 COGNE Gill box mod.SC-400E yoc 1996, feeding creel 5x2=10 cans, delivery 1 can 800x1000 mm., 1 sliver, linked with 1
ITALPRESSE Press, into the ground for 4000 mm., external width 4500 mm., Signode autom. tyeing.
*1 GUALCHIERANI Press mod.FTC-150 yoc 1989, into the ground for 3000 mm., external width 7000 mm., with electric panel yoc 1998,
8 bumps dia.800 mm. (40 kgs.), bale 320/400 kgs.
Global price EUR: 220.000 Ex. Works
********************************************************************************************************************************************
AA22/271109 : Carding Willow
Falubaz carding willow: Euro 15,000/each FCA
Belmatex mixing chamber: Euro 25,000 FCA
Falubaz baleopener: Euro 3000 FCA
Location : EU
********************************************************************************************************************************************
AA79/081209 : Semi worsted machines
NSC Schlumberger GC15 Chain Gills
NSC Schlumberger GC15 chain gill, electronic autoleveller year of manufacture 1995, serial number 29188, wide head,10 end can
creel, dust cabinet , Single Coiler 1000x1200 autodoff .
NSC Schlumberger GC15 chain gill Year of manufacture 1998 wide head ,serial number 30083 ,6 end creel, dust box, Double coiler 2
cans 600x1200 1 sliver per can manual doffing.
NSC Schlumberger GC15 chain gill Year of manufacture 1998 wide head ,serial number 29983 ,6 end creel, dust box, Double coiler 2
cans 600x1200 1 sliver per can manual doffing.
NSC Schlumberger GC15 chain gill, electronic autoleveller year of manufacture 1998, serial number 30081, wide head,8 end can
creel, dust cabinet , Single Coiler 1000x1200 autodoff .
NSC Schlumberger GC15 chain gill Year of manufacture 1998 wide head ,serial number 30082 ,6 end creel, dust box, Double coiler 2
cans 600x1200 1 sliver per can manual doffing.
NSC Schlumberger GC15 chain gill Year of manufacture 1998 wide head ,serial number 29982 ,6 end creel, dust box, Double coiler 2
cans 600x1200 1 sliver per can manual doffing.
GC14 Chain Gill
NSC Schlumberger GC 14 autoleveller chain gill, year 1991, serial number 27854, 6 end table top can creel, without riggers, dust
cabinet, fallers, delivery 1 sliver on to 1 ball auto doff. Price £25,000 twenty five thousand pounds loaded ex-EU.
NSC Schlumberger GC 14 third passage chain gill, year 1993,serial number 28579 with 27cm wide head, 8 end table top can creel,
with out riggers, dust cabinet, fallers, delivery 4 slivers into 4 can, semi auto doff can change. Price £25,000 twenty five thousand
pounds loaded ex-EU.
GC 13 Chain Gill combing
First passage preparer NSC Schlumberger GC 13 chain gill, year 1989, serial number 26305, 8 end table top can creel, with out
riggers, dust cabinet, fallers, delivery 1 sliver into 1 can 1000mm x1200mm auto doff with can compactor. Price £ 13,000 thirteen
thousand pounds loaded ex-EU.
Second passage preparer NSC Schlumberger GC 13 autoleveller chain gill, year 1989, serial number 26306, 8 end table top can
creel, with out riggers, dust cabinet, fallers, delivery 1 sliver on to 1 ball auto doff. Price £ 15,000 fifteen thousand pounds loaded ex-
EU.
NSC Schlumberger GC13 second passage chain gill, year 1989, serial number 26615,10 can creel, dust box, fallers, delivering 2
slivers into 1 can 700x1000 automatic can change can compactor. Price £ 18,000 eighteen thousand pounds reconditioned loaded ex-
EU.
First passage finisher NSC Schlumberger GC 13 chain gill, year 1989, serial number 26735, 8 end table top can creel, with out riggers,
dust cabinet, fallers, delivery 1 sliver into 1 can 1000mm x1200mm auto doff with can compactor..Price £ 13,000 thirteen thousand
pounds loaded ex-EU.
Second passage finisher NSC Schlumberger GC 13 autoleveller chain gill, year 1989, serial number 26736, 8 end table top can creel,
with out riggers, dust cabinet, fallers, delivery 1 sliver on to 1 ball auto doff..Price £ 15,000 fifteen thousand pounds loaded ex-EU.
1st Spinning Set Gills
NSC Schlumberger GC12 autoleveller chain gill, year 1986, serial number 24780, 8 end can creel, delivering 1 sliver into 1 can
1000x1200 auto can change. Price £ 11,000 eleven thousand pounds loaded ex-EU.
NSC Schlumberger GC12 second passage chain gill, year 1987 serial number 25635, double draft, dust cabinet, fallers, 8 end table
top can creel, delivering 2 slivers into 2 cans 700x1200 auto can change with side conveyors. Price £ 11,000 eleven thousand pounds
loaded ex-EU.
NSC Schlumberger third passage GC12 chain gill, 1987, 25494, 8 end large pitch table top can creel, dust cabinet, wide head, 4
slivers into 4 cans 500x1200 can pusher. Wide head. Price £ 11,000 eleven thousand pounds loaded ex-EU.
Spare Gills
NSC Schlumberger GC12 second passage chain gill, serial number 23990 year 1985, 6 end can creel, dust box, fallers, delivering 2
slivers into 2 cans, 700mm x 1200mm, auto can change. Price £ 11,000 eleven thousand pounds loaded ex-EU.
NSC Schlumberger GC12 second passage chain gill, serial number, 23991 year 1985, 6 end can creel, dust box, fallers, delivering 2
slivers into 2 cans, 700mm x 1200mm, auto can change. Price £ 11,000 eleven thousand pounds loaded ex-EU
NSC Schlumberger GC12 second passage chain gill, serial number, 24124 year 1985, 6 end can creel, dust box, fallers, delivering 2
slivers into 2 cans, 700mm x 1200mm, auto can change. Price £ 11,000 eleven thousand pounds loaded ex-EU.
NSC Schlumberger GC12 second passage chain gill, serial number 24788 year 1986, 6 end can creel, dust box, fallers, delivering 2
slivers into 2 cans, 700mm x 1200mm, auto can change. Price £ 11,000 eleven thousand pounds loaded ex-EU.
NSC Schlumberger GC12 second passage chain gill, year 1984 serial number 23482, double draft, dust cabinet, fallers, table top can
creel, delivering 2 slivers into 2 cans 700x1000 auto can change. Price £ 11,000 eleven thousand pounds loaded ex-EU.
NSC Schlumberger third passage GC12 chain gill, 1982, 22980, 12 end table top can creel, dust cabinet, wide head, 4 slivers into 4
cans 500x1200 can pusher. Wide head. Price £ 11,000 eleven thousand pounds loaded ex-EU.
********************************************************************************************************************************************
AA10/071209 : Semi Worsted Machinery
2 "NSC" gillboxes Type GC12, year 1985 autoleveler, creel 2 x 4, delivery can dia. 600 mm,
each linked with one "ST ELOI" can press year 1988, automatic tying
1 "NSC" gillbox autoleveler type GC13 year 1989, creel 2 x 6 cans
automatic delivery can 800 x 1200
1 "NSC" gillbox type GC14 year 1992, creel 2 x 5 cans, oiling device,
delivery 1 can 800 x 1200
1 "NSC" gillbox type GV10 year 1989, delivery 2 cans 700 x 1200
1 NSC Delfilter Gill Box Type D3 GC15 year 1998, creel 2x9 cans, oiling device
Linked with 1 ST ELOI can press, automatic tying, for pour bumps dia. 400 mm
1 "COGNETEX" rebreaker gills type SMC400 year 1988, 5 rebreaking cylinders, creel 2 x 7,
aut. delivery can 600 x 1200, feeder root PDC-1
Ring Spining
4 "ZINSER" worsted Spinning frames, year 1984, Type 418 L, 388 spindles, rings dia. 75 mm, pitch 110 mm, COWEMAT, tubes 300 mm
1 "NSC" semi worsted frames type CF63 year 1998, 2 x 120 spindles, ring dia. 90 mm, tubes 400 mm, drafting 4 cylinders, aut. doffing,
linked with :
1 "MURATA" winder year 1998 type 08L, 16 spindles, traverse 200 mm conical "PEYER" clearers type Optiqs, splicer D5, 1 doffer, no
waxing, 1 "PNEUMABLO" blower
1 HDB semi-worsted Spinning frame, year 2000, rings dia. 120 mm, pitch 180 mm, tubes 600 mm, SAMPRE Drafting
********************************************************************************************************************************************
AA05/171209 : COGNETEX Ring spinning
2 x COGNETEX FTC.9L SPINNING FRAMES (Year 1987) –
Double side with single-control of 432 spindles each
Feeding from bobbin finisher – 2 rovings per bobbin
Spindles drive at tangential belt, Autodoffing
With single Magitex cleaning device on each machine
Gauge: 90 mm 432 spindles each, Ring: dia. 65 mm., Tube height 280 mm.,
Open draft frame with lower sleeve and control by upper field rollers
SKF arm PK1601 with Sizes of lower sleeve: dia. 131.5 mm width 40 mm.
N. 1 COGNETEX FTC – 9L SPINNING FRAME (Year 1990) – SERIAL 04068/89
Feeding from bobbins frame - 2 rovings per bobbin
Spindles drive at tangential belt
Autodoffing
With Magitex cleaning device
Gauge: 90 mm
432 spindles
Ring: dia. 65 mm
High draft with arm SKF PK1601
tube length 280 mm.
New Price : C&F price is euro 78,500.
********************************************************************************************************************************************
AA05/171209 : Delpiano Double Drive Ring Spinning Frame
mod. FDP - double side with independent drives -
608 spindles - spindle gauge 90 mms -
ring dia. 60 mms - tube height 280 mms. -
drafting system at 3 cylinders PK 1601 type -
creel for feeding by bobbins and special creel for feeding by sliver cans -
equipped with automatic doffing of the bobbins and ElectroJet travelling cleaner -
Y.O.M. 1998 - Price dismantled and loaded on truck Euro 60.000,00
********************************************************************************************************************************************
AA35 / 171209 : Gilbos Winder.
-Maker: Gilbos, Italy
-Yom: 2003 years.
-Model: AW-2000.
-Nos,os drum: 12 spindles/each set (6 sets), 6 spindles(1 set)
-Complete set with standard accessories.
*Quantity: 7 sets.
*Price term: *12 spindles-U$35,000/each set C&F Asian port
* 6 spindles-U$20,000 C&F Asian port
********************************************************************************************************************************************
AA05/281209 : Passage line
OPTION 1 - C&F EURO 165,000.-
no. 1 NSC Schlumberger gill mod. GC.15, year 1996, 10 can/bobbins feeding, chain head, delivery 1 sliver in 1 can dia. 800x1200,
automatic can change, enzimage
no. 1 Sant'Andrea gill mod. HC.22, year 2001, 16 can/bobbins feeding, chain double head, delivery 1 sliver in 1 can dia. 800x1200,
automatic can change, enzimage
no. 1 Sant'Andrea gill mod. HC.22-ARE, year 2001, 12 can/bobbins feeding, chain double head,delivery 1 sliver in 1 can dia.
800x1200, double electronic autoleveller,automatic can change, enzimage
OPTION 2 - C&F EURO 155,000
no. 1 NSC Schlumberger gill mod. GC.14, year 1993, 18 cans feeding, chain head, delivery 2 slivers in 1 can dia. 1000x1200,
automatic can change
no. 1 Sant'Andrea gill mod. HC.22, year 2001, 16 can/bobbins feeding, chain double head, delivery 1 sliver in 1 can dia. 800x1200,
automatic can change, enzimage
no. 1 Sant'Andrea gill mod. HC.22-ARE, year 2001, 12 can/bobbins feeding, chain double head, delivery 1 sliver in 1 can dia.
800x1200, double electronic autoleveller,automatic can change, enzimage
OPTION 3 - C&F EURO 135,000
no. 1 Sant'Andrea gill mod. HC.22, year 2001, 16 can/bobbins feeding, chain double head, delivery 1 sliver in 1 can dia. 800x1200,
automatic can change, enzimage
no. 1 Sant'Andrea gill mod. HC.22-ARE, year 2001, 12 can/bobbins feeding, chain double head, delivery 1 sliver in 1 can dia.
800x1200, double electronic autoleveller,automatic can change, enzimage
********************************************************************************************************************************************
AA05/281209 : 1 Cognetex gill mod. SCE.400/11VA, year 1995, with electronic autoleveller,
connected directly to an Italiana Presse bumps press with doffing robot.
C&F price is 32,500.- euro
********************************************************************************************************************************************
AA30/301209 (partner with AA79) : NSC Thibeau Worsted Card 3000mm Type CA6 Year 1988
3M2M5
Volumetric Hopper
2 Morels
3 Burr rollers
TR drafting Unit
1000x 1200 can coiler autodoff
Price on request
NSC Spinning Preparation Line 1990
GC13 Autoleveller
Single coiler 800x1000 automatic doffing
12 end can creel
GC13 Double Coiler
2 cans 800x1000mm automatic doffing
1 sliver per can
10 end can creel
GC13 Quad Coiler
4 cans 500x1000 mm semi doff
1 sliver per can
16 end can creel
2 off FM7A, FINISHER
16 head double mesh = 32 ends
autodoff
Price EUR....96,000 FOT EU ( for all 5 machines)
Spinning Frames
3 off NSC CF32D Double sided Spinning Frames Year 1988
75mm ring
NSC drafting
400 spindles each ( 200 per side)
Price EUR...20,000 each FOT
NSC Roving/Rubbing Frames
1 off NSC Schlumberger FMV32 Vertical Rubbing Frame Year 1988
16 heads delivering 32 rovings on 16 bobbins
Automatic doffing
Serial no 5994
EUR...40,000 each FOT EU
NSC Schlumberger FMV 30 1984 Serial No 5778
12 heads delivering 24 rovings on 12 bobbins
Automatic doffing, including around 2,000 tubes
EUR...15,000 FOT EU
NSC BM14 32 flyers Year 1988
SKF drafting
EUR...20,000 FOT EU
NSC GC15 Gills
2 off GC15 electronic Autoleveller
Single coiler 1000x1200 autodoff
Wide head
10 end can creel no 29188 Year 1995
8 end can creel no 30081 Year 1998
4 off GC15 Double coiler
2 cans 600x1200
1 sliver par can
manual doff
wide head
6 end creel
Year 1998/1999
NSC GC14 Gills
NSC Schlumberger GC 14 third passage chain gill, year 1993,serial
number 28579 with 27cm wide head, 8 end table top can creel, with out riggers,
dust cabinet, fallers, delivery 4 slivers into 4 can, semi auto doff can
change.
Price EUR....28,000 FOT EU
1 off Schlumberger GC 14 autoleveller chain gill, year 1991, serial
number 27854, 6 end table top can creel, with out riggers, dust cabinet,
fallers,delivery 1 sliver on to 1 ball auto doff.
Price Eur...28,000 FOT EU
GC 13 Chain Gill combing
NSC Schlumberger GC 13 chain gill, year 1989,
serial number 26305, 8 end table top can creel, with out riggers, dust
cabinet,fallers, delivery 1 sliver into 1 can 1000mm x1200mm auto doff with can
compactor. Eur...15,000
NSC Schlumberger GC 13 autoleveller chain gill,
year 1989, serial number 26306, 8 end table top can creel, with out
riggers,dust cabinet, fallers, delivery 1 sliver on to 1 ball auto doff.
EUR...17,000
NSC Schlumberger GC13 second passage chain gill, year 1989, serial
number 26615,10 can creel, dust box, fallers, delivering 2 slivers into 1 can
700x1000 automatic can change can compactor. ( P) EUR....20,000
NSC Schlumberger GC 13 chain gill, year 1989,
serial number 26735, 8 end table top can creel, with out riggers, dust
cabinet,fallers, delivery 1 sliver into 1 can 1000mm x1200mm auto doff with can
compactor. EUR.....15,000
NSC Schlumberger GC 13 autoleveller chain gill,
year 1989, serial number 26736, 8 end table top can creel, with out riggers,
dust cabinet, fallers, delivery 1 sliver on to 1 ball auto doff.
EUR...17,000
1st Spinning Set
NSC Schlumberger GC12 autoleveller chain gill, year 1986, serial number
24780, 8 end cancreel, delivering 1 sliver into 1 can 1000x1200 auto can
change. Price EUR...13,000
NSC Schlumberger GC12 second passage chain gill, year 1986 serial number
24782, double draft, dust cabinet, fallers, 10 end table top can creel,
delivering 2 slivers into 2 cans 700x1000 auto can change. Price EUR....13,000
NSC Schlumberger third passage GC12 chain gill, 1982, 22980 , 12 end
large pitch table top can creel, dust cabinet, wide he 24784 ,dust cabinet, fallers, 6 end table top can creel, delivering 1
sliver into 1 can 1000x1200 auto can change. Price EUR...13,000
NSC Schlumberger GC12 autoleveller chain gill, year 1986, serial number
24781, 10 end can creel, delivering 1 sliver into 1 can 1000x1200 auto
can change. Price EUR...13,000
NSC Schlumberger GC12 second passage chain gill, year 1984 serial number
23482, double draft, dust cabinet, fallers, table top can creel,
delivering 2 slivers into 2 cans 700x1000 auto can change. Price EUR....13,000
NSC Schlumberger GC12 third passage chain gill, 1988, 25753, 8 end table
top can creel, dust cabinet, wide head, 4 slivers into 4 cans 500x1000
can pusher. Wide head. Price EUR.....13,000
Spare Gills
NSC Schlumberger GC12 second passage chain gill, year 1987 serial number
25635, double draft, dust cabinet, fallers, 8 end table top can creel,
delivering 2 slivers into 2 cans 700x1200 auto can change with side
conveyors. Price EUR....13,000
4 off NSC Schlumberger GC12 third passage chain gill, serial number
23990,24124,24788, 23991, 6 end can creel, dust box, fallers, delivering
2 slivers into 2 cans, 700mm x 1200mm, auto can change. Price EUR.... 13,000
NSC Schlumberger third passage GC12 chain gill, 1987, 25494, 8 end large
pitch table top can creel, dust cabinet, wide head, 4 slivers into 4
cans 500x1200 can pusher. Wide head. Price EUR 13,000
GC12 Blending Gill
2 heads GC12 Duo
20 end can creel, Single Coiler 700x1200 Autodoff with can pressor
25072 1987
Price EUR 13,000
NSC Schlumberger GN6 gill box, year 1980, serial number 21801, 8 end
can creel, dust box, fallers, change wheels, delivering 4 sliver into 2 can,
500mm x1000 mm manual can change. Price EUR ...7000
Fancy twisting Department
2 off Saurer Allma ESP-X
Hollow Spindle Fancy twisting
24 spindles
8 inch traverse
Push button control
7928,7929 1985
Saurer Allma ESP-X
Hollow Spindle Fancy twisting
16 spindles
8 inch traverse
7254 1983
EUR....12,000 each
Hacoba Pirn Winder 4sp EUR...17000
********************************************************************************************************************************************
AA05/311209: No. 1 NSC Schlumberger mod. GC.12, year 1986, 16 balls feeding, ball delivery, manual doffing
Price usd. 24,500.-
No. 1 NSC Schlumberger comber mod. PB.29.LF, year 1985,
24 cans feeding, 1 sliver in 1 can dia. 700 x 1000 mm., manual doffing
Price usd. 10,500.-
No. 1 NSC Schlumberger preparation line mod. GC.12, year 1987, composed by:
- 1st passage gill, 10 cans feeding, 1 sliver in 1 can dia. 700 x 1000 mm., manual doffing
- 2nd passage gill, 10 cans feeding, autoleveller, 1 sliver in 1 can dia. 700 x 1000 mm., manual doffing
- 3rd passage gill, 10 cans feeding, 2 slivers in 2 cans dia. 700 x 1000 mm., manual doffing
Price of the line usd. 69,500.-
No. 1 NSC Schlumberger preparation line mod. GC.12, year 1987, composed by:
- 1st passage gill, 10 cans feeding, 1 sliver in 1 can dia. 700 x 1000 mm., automatic doffing
- 2nd passage gill, 10 cans feeding, 4 slivers in 2 cans dia. 700 x 1000 mm., manual doffing
Price of the line usd. 49,500.-
1st Blending San'tAndrea RSN 740 1 1991 1H*1C
2st Gill box San'tAndrea CSN 1 1991 1H*1C
3rd Reducer gill (Pre-Recomb) San'tAndrea VSN 448 1 1991 1H*1C*2S
Comb Recomber San'tAndrea P90, 300 18 1991 1H*1C
1st gill after combing Gill box San'tAndrea VSN 448 1 1991 1H*1C
2nd gill after combing A/L-Gill Box San'tAndrea VSN ARM 448 1 1991 1H*1C
Auto leveller A/L-Gill Box San'tAndrea VSN ARM 448 1 1991 1H*1C
High gill High Speed Gill Box San'tAndrea VSN 448 1 1991 2H*1C
Bi-Coiller Bi-CoillerGill Box San'tAndrea SH24, 456 1 1991 2H*2C*4S
Reducer Bi-Coiller Gill Box San'tAndrea SH24, 456 1 1991 2H*2C*4S
Finisher Bobbiner San'tAndrea RF 2/A 1 1994 24SP
********************************************************************************************************************************************
AA05/291209 : Ring Spinning
no. 6 NSC mod. CF.24L of 432 spindles each, ring dia. 65 mm.Year of manufacture 1978
no. 4 Textima mod. 2111.K of 360 spindles each, ring dia. 65 mm. Year of Manufacture : 1981
AA05/281209: 2 SCHLUMBERGER SEMIWORSTED RINGSPINNING MACHINES TYPE CF 32
FOR DIRECT SPINNING OUT OF CAN, YEAR OF CONSTRUCTION 1990
EACH 256 SPINDLES – SINGLE SIDED
RING DIA 75 MM – GAUGE 105 MM - TUBE LENGTH 360 MM
2 DRAFTING ZONES WITH BALLOON ROLLERS AND DOUBLE APRONS
AUTOMATIC COPSDOFFER AN D TUBEFEEDER
CREEL FOR SLIVERS OUT OF CANS DIA 500 x 1200 MM
MAX FIBRE LENGTH 200 MM
YARN RANG Nm 4 – Nm 20
CONE SIZE : TUBES DIA 30/35 MM INSIDE TOP/BOTTOM x 360 MM LENGTH
INCLUDING APPROX 1500 PIECES CONES WITH EACH MACHINE
MEASUREMENTS :
LENGTH APPROX 29 M x 3,50 M WIDTH INCLUDING CREEL FOR CANS
PRICE EACH EUR0 74,500.—
********************************************************************************************************************************************
AA05/020109 : Sistig machine 1984
Quantity : 1 Price : OBO EUR 58,000
This line is in very good condition and complete,Machine dismantled and loaded in 3 containers,4.3 m,Entrence device,Jbox,
Dustinstallation,
Metaldetector,2 scheeringheads,Folder in trolys,New PLC electricity 2006,New cilinders and blades 1998,New blades 2008
********************************************************************************************************************************************
AA05/020110 : lngersoll Air Compressor
Quantity :1 Price : $16,000
Ingersoll Rand Rotary Screw Air Compressor mod. SSR-EP125, year 1998,125 HP, 571 CFM, 125 psi operating capacity, 460 V / 60
Hz 3-phase,Ingersoll Rand air dryer mod. TM600, filters set, F.A.I. receiving tank 4,000 lt capacity.
********************************************************************************************************************************************
AA05/020110 : lngersoll Air Compressor
Quantity :1
No. 1 Ingersoll Rand Rotary Screw Air Compressor mod. SSR-EP-100, year 1998,
100 HP , 446 CFM, 125 psi operating capacity, 460 V / 60 Hz 3-phase,
No. 1 Ingersoll Rand Rotary Screw Air Compressor mod. SSR-XF-50, year 1997,
50 HP , 218 CFM, 125 psi operating capacity, 460 V / 60 Hz 3-phase,
Ingersoll Rand Air Dryer mod. TM800, filters set, F.A.I. receiving tank 3,000 lt capacity,.
Price usd. 21,500.-
********************************************************************************************************************************************
AA42/ : OCTIR Card
Quantity : 1
OCTIR Card mod.TITANUS yoc 1983, chute feed, width 3500 mm., 2 drums dia.2000 mm., 5 workers, 2 doffers dia.750 mm., rotary
Imat reducing head, delivery 1 can 1000x1200 mm. (See Semi worsted machines)
********************************************************************************************************************************************
AA03/ : FOR Card
3 semiworsted card
FOR, year 1990, ww 3.500 mm, type 05340/D9
with hopperfeeder
breastsection
3 Morellroller
2 maincylinder ø 1500 mm
with 5 pairs worker/stripper
2 doffer ø 1250 mm
highspeed flying comb
3 cylinder drafting head
coiler for 1 can ø 1200 x 1200 mm
automatic canchanger production 250-400 kg/h
Now we can offer EUR 56.000,00 C+F.
now we can reduce our price to EUR 49.000,00 C+F.
1 semiworsted card C+F each EUR 45.000,00
FOR, year 1978, type Minicard, width 2500 mm, with hopperfeeder, weight pan, breastsection, maincylinder Ø 800 mm, 3
worker/stripper, doffer Ø 800 mm, maincylinder Ø 800 mm,
3 worker/stripper, doffer Ø 800 mm, highspeed fly comb, 2 coiler for cans Ø 1000 x 1200 mm
all rollers with unflexible wire, production: 100-200 kg
********************************************************************************************************************************************
AA30/120110 : NSC Spinning Preparation Line 1990
Quantity : 1 Price : EUR 96,000 FOT
GC13 Autoleveller
Single coiler 800x1000 automatic doffing,12 end can creel
GC13 Double Coiler
2 cans 800x1000mm automatic doffing,1 sliver per can,10 end can creel
GC13 Quad Coiler
4 cans 500x1000 mm semi doff,1 sliver per can,16 end can creel
2 off FM7A
16 head double mesh = 32 ends,autodoff
Location : Europe
********************************************************************************************************************************************
AA03/280110 : Gillbox Line
Quantity : 1 Price : EUR 59,000.00 C+F
gillbox line NSC
gillbox NSC, type GC12, year 1986, feeding: 8 cans, delivery: 1 sliver in 1 can Ø 700 x 1000 mm,automatic canchanger,with
autoleveller.
gillbox NSC, type GC 12, year 1986, feeding: 8 cans, delivery: 2 slivers in 2 cans Ø 700 x 1000 mm,automatic canchanger.
gillbox NSC, type GC 12, year 1986, feeding: 12 cans, delivery: 4 slivers in 2 cans Ø 700 x 1000 mm,automatic canchanger.
finisher NSC, year 1986, FMV30, 20 heads, feeding: 20 cans, delivery: 20 bobbins each 2 slivers on tubes Ø 70 x 300 mm.
********************************************************************************************************************************************
AA86/280110 : Thibeau Card
AA80/ 050809 [TIV,Mill Floor]
Quantity : 1 Price : $65,000 Mill Floor
1993 Thibeau Model B3P3 Card, 2.5 Meter, 2-cylinder with Model VA-1 Feeder, 40x48" Coiler with Can Changer.
********************************************************************************************************************************************
AA42/020210 : Masias semi worsted Card line ( Photo )
Quantity : 1 Price : EUR 140,000 Mill Floor
Carding machine,Masias,1998,
Delivery terms Ex-works (Incoterms 2000) ,
Description A carding Group, consisting of :
• Bale opener 1.5m
• Spin finish application in tube
• Two silos for material 4x10x5 m with automatic sliding door
• Feeding group for carding section
• Carding unit 2.5m
Condition machine Out of production
Location : Europe
********************************************************************************************************************************************
AA05/010210 : Schulumberger GV.11
Quantity : 1 Price : $29,500 C&F
NSC GV.11 gill, 4th passage, year 1993
Intersecting GV 11
Year 1993
Creel entry for 8 cans x 1 sliver or 4 cans x 2 slivers : 700 x 1000 mm.
Delivery 4 slivers in 2 cans : 700 x 1000 mm
Max wight feeding : Grams 70
double cilynder in feeding
Drafting : double field of needles
twins drafting cilynders dia. 30/62.5 mm
drafting average 4.2 to 12.5
speed delivery : 500 meters x mi9nute
********************************************************************************************************************************************
AA05/040210 : NSC Schlumberger preparation line ( Photo )
Quantity :1 Price : $100,000 C&F
NSC Schlumberger preparation line mod. GC.14, year 1994, composed by:
- first passage gill, serial no. 28715, cans feeding, chain head,automatic can change, delivery 1 sliver in 1 can dia. 1000 x 1200 mm.
- second passage gill, serial no. 28717, cans feeding, chain head, electronic autoleveller, automatic can change, delivery 1 sliver in 1
can
dia. 1000 x 1200 mm.
- third passage gill, serial no. 28719, cans feeding, chain head,automatic can change, delivery 2 slivers in 2 cans dia. 700 x 1000 mm.
********************************************************************************************************************************************
AA90 /280110 : Benninger Supertronic ( Photo )
Quantity : 1 Price : EUR 45,000 C&F
N° 1 Benninger Supertronic,Year 1990,width 3800mm,Maximum flangia 1000,waxing device,creel benninger with 360 cones,gauge
24
Machine in very good condition
Location :Europe
********************************************************************************************************************************************
AA03/250110 : Worsted ringspinning frames
1 pc. type 2114/1995 Unit Price : EUR 24,000 - loaded
3 pcs. type 2115/1997 Unit Price : EUR 26,000 - loaded
Quantity : 4
CSM Germany, type 2114/2115, year 1995/1997, 816 spindles, pitch 82,5 mm, ring-ø 50 mm, double apron system, Lycra-device
********************************************************************************************************************************************
|
|
|
|
|
