Filament Yarn and Yarn Conditioning Machinery
( Page 1 )
|
|
|
|
|
|
|
AA25/010210 : Extruder Line for BCF Carpet yarn
Quantity : 1 Price : EUR 250,000
make PLANTEX, YOC 1998, refurbished in 2008, approx. 250 kg / h, dtex 2100, an average of 800 to 3600 dtex was
manufactured, made from polypropylene and polyamide, consisting of 3 extruders with feeding of three colours, make
COLORTECH, cooling unit, texturing unit, stretching unit, winding of cardboard tubes, 12 winding heads.
*****************************************************************************************************************************************************
AA05/210110 : SAVIO High Bulking Machine ( Photo )
Quantity :1 Price : EUR 30,000 C&F
SAVIO High Bulking Machine mod. Espero Volufil, Year 2000, 18 spindles,waxing device, 6" traverse,cylindrical tube, drum with 2
turns in stainless steel,electrical heating, automatic doffing. Voltage 380.3.50 Hz
Accessories included in this package deal:
1 Instruction catalogue - 1 Instruction manuals - 1 Electrical diagrams - 1 lot of spare parts new and used
*****************************************************************************************************************************************************
AA11/080210 : Texturizing Machine
Quantity : 1 Price : EUR 189,000 Mill Floor
Texturizing Machine, make RPR, Type 3SD 90, Year 2000, for PA/PES/PP from 22 to 300 dtex., final thickness, 108 positions each
side, unical driven each face, tension control online , with automatical cutter, Creels,Ovens, Spindles TEMCO ( céramic / Pu ),
Interlacing nozzles, Winder with precision,Doffer, Bobbins out left
*****************************************************************************************************************************************************
FDY / POY SPINNING MACHINES ( Photo )
Quantity : 2 Price for 2 lines : EUR 385,000 Mill Floor
MANUFACTURER: BARMAG
The spinning machine purchased in 1998.
It comprises 2 extruders, each with 12 spinning positions.
Max. production capacity of each extruder is 5200 kg/d.
Each extruders is equipped with:
Extruder type 9E10
With 6 heating zones, the temp. range 2500 - 3100C Screen quenching chambers Spinning heads equipped with spinning pumps and spin
packs There are 12 spinning positions, each with 6 points CPF central filter is installed on the machine.
The extruders are equipped with " a hot tubes", max. temp. 2000C., spin finish application jets and interlacing jets.
In each position a birotor CRAFT WINDER 6/900 is installed.
The max. spinning speed is 5500 m/min.
The manufactured titre range is for FDY 33 - 76 dtex. For POY 76-110 dtex
It is possible to control individual positions.
One machine of 12 spinning positions needs 12 x 40ft containers to be loaded.
Machines complete and in excellent running condition
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA19/130410
AA23/010310(Un-CRLIII-EF)-13*
AA83/190110(Un-CSLIII-EC)
*****************************************************************************************************************************************************
STEAMING AND SHRINKING MACHINE
Quantity : 2 Price : EUR 49,000 - Total FCA
constr. "SUPERBA",
type WPFU,
year 1989,
10 bands,
linked with:
WINDER constr. "SSM", type SM.252-S
Quantity : 1
WINDER, constr. "SSM", type SM.252-S, year 1989, 20 spindles, traverse 8", 5°57', waxing device, overfeedrollers, for soft cones.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA94/010310(total YSIII-EF)-2
AA40/011009(1xYarnshrink+1xWinder RCTII-EM)-2
*****************************************************************************************************************************************************
STEAMING AND SHRINKING MACHINES
Quantity : 3 Price : EUR 35,000 - Each FCA
constr. "SUPERBA",
type WPFU,
year 1989,
10 bands,
linked with:
WINDER, constr. "SSM", type SM.251-S
Quantity : 1
WINDER, constr. "SSM", type SM.251-S, year 1989, 10 spindles, traverse 8", 5°57', waxing device, overfeedrollers, for soft cones.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA94/010310(each RLIII-EF)-2
AA40/011009(1xYarnshrink+1xWinder CAPLI-EM)-2
*****************************************************************************************************************************************************
CONTINUOUS HEAT SETTING PLANT
Quantity : 1 Price : EUR 450,000 FCA
CONTINUOUS HEAT SETTING PLANT for carpet yarns,
constr. "SUPERBA",
type TVP.2.S,
year 2003,
creel Gilbos 36 ends,
3 bobbins/position,
yarn detector,
pre-steamer,
tunnel TVP2S length 18 m,
stainless steel band 3mm,
holes width 250 mm,
accumulator MAT.2.S length 6m, cooler 2x RTV/HE,
dryer ST.V2.S, steam regulation system CBS/2S,
coiler for straight set DAV2S,
yarn tension regulation PRE.2.S,
prevapo turbo 3 modules HEP,
friezing box MF.4,
hydraulic roller regulation REG/2E / TEH,
computer for regulation/control complete plant ARGM,
winder B.400,
36 spindles.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA94/010310(YLIII-EF)-2
*****************************************************************************************************************************************************
STEAMING AND SHRINKING MACHINE
Quantity : 1 Price : EUR 25,000 FCA
constr. "SUPERBA",
type WPF/U,
10 bands,
linked with:
WINDER, constr. "SSM", type SM-F.251
Quantity : 1
WINDER, constr. "SSM", type SM-F.251, year 1979, 20 spindles, traverse 6", cylindrical.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA94/010310(CLIII-EF)-2
*****************************************************************************************************************************************************
ICBT Texturizers
Total Price : EUR 150,000 FCA
Quantity : 1
ICBT Model FTF15E2 192 Position/192 Spindles Draw-texturizing Machine
(S/N 95304-01) 1995
Equipped with double heater
First Heater with High Temperature
Machine include independent command of temperature for sections
4 Top & 4 Bottom Take-ups
S or Z Twist, Fag Stacked Friction, Motorized
Ceramic type of disk
DIMS on disk: 9MM Thick, 52MM Dia, 14.45 MM Bore
8 Per Spindle Disk
Max Mechanical Speed is 1500 MAX
Yarn Range to produce: 30 to 150 Denier
Automatic Doffing
Guide Discs
Machines prepared to work with Air Manifold
Nip Rollers on the axes of the machine
Computerized speed command
Machine Equipped with weight and length control for the packages
Individual Motors / Inverters
Temco Yarn Tension Monitoring
No Catwalk with machine
Rotative Creel
DIMS on machine: 69.5” X 28.7” X 9.8”
Quantity : 1
ICBT FTF 15E2X2 96 Position / 192 Spindles Draw-texturizing Machine (S/N 96441-11) 1997
Equipped with single heater
First Heater with High Temperature
Machine include independent command of temperature for sections
4 Top & 4 Bottom Take-ups
S or Z Twist, Fag Stacked Friction, Motorized
Ceramic type of disk
DIMS on disk: 9MM Thick, 52MM Dia, 14.45 MM Bore
8 Per Spindle Disk
Max Mechanical Speed is 1500 MAX
Yarn Range to produce: 30 to 150 Denier
Automatic Doffing
Guide Discs
Machines prepared to work with Air Manifold
Nip Rollers on the axes of the machine
Computerized speed command
Machine Equipped with weight and length control for the packages
Individual Motors / Inverters
No Catwalk with machine
Rotative Creel
DIMS on machine: 69.5” X 28.7” X 9.8
Quantity : 1
ICBT FTF 15E3 216 Position / 216 Spindles Draw-texturizing Machine (S/N 91424-3) 1996
Equipped with single heater
First Heater with High Temperature
Machine include independent command of temperature for sections
4 Take ups
S or Z Twist, Fag Stacked Friction, Motorized
Ceramic type of disk
DIMS on disk: 6MM Thick, 45MMDIA
9 Per Spindle Disk
Max Mechanical Speed is 1500 MAX
Yarn Range to produce: 30 to 150 Denier
Pneumatic Threadup
Machines prepared to work with Air Manifold
Nip Rollers
Computerized speed command
No Catwalk with machine
Vertical Swivel
DIMS on machine: 54.8” X 23” X 7.5”
Quantity : 1
ICBT FTF 15E3 216 Position / 216 Spindles Draw-texturizing Machine (S/N 91424-06)
Equipped with single heater
No Automatic Doffer
4 Take ups
S or Z Twist, Fag Stacked Friction, Motorized
Ceramic type of disk
DIMS on disk: 6MM Thick, 45MMDIA
9 Per Spindle Disk
Max Mechanical Speed is 1500 MAX
Yarn Range to produce: 30 to 150 Denier
Pneumatic Threadup
Machines prepared to work with Air Manifold
Nip Rollers
Computerized speed command
No Catwalk with machine
Vertical Swivel
Individual Motors/Inverters
54.8” X 23” X 7.5”
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA23/120110-5
*****************************************************************************************************************************************************
Cone-dyeing machine
Quantity : 1 Price : -
Cone-dyeing machine Obem
with horizontal dye-spindles
capicity : 100 - 300 kg
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA03/290310-N
*****************************************************************************************************************************************************
BCF Extrusion Units RIETER ( Photo )
Quantity : 2 Unit Price : EUR 650,000 Mill Floor
Type symTTex for production of one colour or off-white Texturizing
Year : 2007
carpet yarn with 8 thread
Unit consisting of :
Structure : Vertical self caring steel structure
Product : BCF Yarn on Package
Row Material : Polyamide 6, dry Chips in Filament quality
Technical details
Nos. of lines : 2
Extrusion Screw – Diameter : 90mm
Length – Dia / relation screw : 30
Spinning pumps / positions : 1
Spinning pumps capacity : 4 X 15 ccm/rev
Size Spindle nozzles : 109 X 240mm
Nos. Of Spindle pumps : 1
Spinning oil pump capacity : 12X1 ccm/rev
Nos. of winders : 1
Nos. Winding positions : 4
Production details
Production Hrs : 330 Days / Year
Titre range : 700 to 1450 dtex
Speed DUO II mech. /electrical : max. 4125m/min.
Working range winder mech./ electrical : 1500-3800
The approximate value is based on specific Texturizing nozzles and above mentioned titre range.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AB13/200310-N
*****************************************************************************************************************************************************
BARMAG POY Polyester Filament Spinning Lines ( Photo )
Quantity : 3 Unit Price : EUR 285,000 Mill Floor
Year : 1996
72 thread lines each
Production capability : 50-300 dtex
Status : In production
Each line comprises :
Quantity : 1
- BARMAG 12 E Extruder, 100 KW motor :
each with 2 feeding hoppers,
mixing device on input side
filter system NSS7 on melt side
Quantity : 12
- spinning pumps
Quantity : 12
- spinning beams with 6 threads each
Quantity : 72
- self suction quenching tubes
Quantity : 72
- spin finish applicators
Quantity : 72
- entangling units
Quantity : 72
- yarn break detectors
Quantity : 12
- BARMAG CW6 ER Craft Winders, 6 cops
Electric controls and power supplies
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AB16/020410-0
*****************************************************************************************************************************************************
NEUMAG BCF EXTRUSION LINE ( Photo )
Quantity : 1 Price : EUR 170,000 Mill Floor *
GENERAL
PRODUCTION OF BCF POLYPROPYLENE SINGLE COLOR CARPET YARN
MANUFACTOR NEUMAG
TITERRANGE 1600 / 3200 DTEX
FILAMENTS 120 / YARN TRILOBEL
ARRANGEMENT VERTICAL LINE
LEVEL 4.5 M EXTRUDER
SPINNINGBEAM WITH SPINNERETS
QUENCHING CABINETS
GROUND FLOOR TEXTURIZING MACHINE
WINDERS
CONSTR DATE 1994 START DATE 1994
1)COLORTRONIC CONVEYING FOR POLYPROP AND MASTERBATCH (excl vacuumpump)
2)HARTIG ONE EXTRUDER
DIAMETER 114 MM
L/D =28
HARTIG
3)K-TRON COLORMETERING GRAVIMETIC MASTERBATCH METERING ( K TRON)
4)NEUMAG ONE SPINNINGBEAM WITH 8 SPINNERETS 120 FILAMENTS TRILOBEL
4 SPINNING PUMPS 30CC/T
8 SPINNERETS PRO EXTRUDER
SPARE 8 SPINNERETS
5)NEUMAG ONE DOWTHERM-HEATER HEATED WITH DOWTHERM VAPOUR(SEPERAET ELECT BOILER)
6)NEUMAG QUENCHING AIR 4 CHAMBERS
2 SPINNERETS PRO CHAMBER
SPINNING OIL METERING PUMPS FOR NEATOIL
7)NEUMAG DRAW TEXTURIZING MACHINE 4 POSITIONS PRO EXTRUDER
4 POSITIONS IN TOTAL
PRO POSITION 2 YARNS
1 DOUBLE AUTOMATIC YARN CUTTER
1 COLD GODDET INLET
2 HEATED GODDETS DRAW
2 HEATED GODDETS DRAW(DIGITAL CONTROLLER FOR TEMP)
1 DOUBLE HOT AIR SPLIT TEXTURIZING DEVICE
1 LARGE DOUBLE COOLING DRUM
1 DOUBLE AIR INTERMINGLERS ( TEMCO)
1 COLD DRAW OFF GODDET
1 DOUBLE AUTOMATIC WINDER RK3000
AUTO DOFFING
6 INVERTORS 1INLET GODDETS + FIRST DRAW DUOS
1 AND 2 SIEMENS 2DRAW GODDETS
3,4,5AND 6 MITSUBISCHI 3,4,5,6 INDIVIDUAL PRO DRAW OFF GODDET
10)NEUMAG TEXTURAZING NOZZELS 10 PIECES
11)NEUMAG LAMELLA CHAMBERS 10 PIECES
12) VARIOUS SPARE PARTS
13)NEUMAG EXHAUST FANS ONE FOR MONOMER
ONE FOR TEXTURATION
ONE FOR COOLING DRUM
ONE FOR TANGLING BOX
14) ONE YARN SUCTION PISTOL
PRODUCTION CAPACITY
PRO EXTRUDER 1 COLOR
8 YARNS
1950 M/MIN ON DRAW GODDETS
1700 M/MIN ON WINDER
2400 DTEX
195 KG PRO HOUR
140 TONS PRO MONTH
INCLUDED
ONE DOWTHERM-HEATER
CONSUMPTION
CONSUMPTION PRO 100 KG COLORLESS BCF YARN
POLYPROP CHIPS 102 KG (2 % waste )
SPINFINISH 1.1 KG
ELECTRICITY 160 KWH (compressed air included)
WATER 200 LITER (cooling extruder)
LABOR 0.8 HOUR
PACKAGING 30 TUBES
0.3 PALLETS
MASTERBATCH AVERAGE ADDITION 3 %
PRICE DEPENDS ON COLOR 2,5< <12 €/KG
Total renewed in 2005
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA42/140410(AYIV-EM)-17
AA07/120410(CAIV-EF)*
AA44/150410(RLIV-EM)
*****************************************************************************************************************************************************
Starlinger/Barmag line for production of PP tapes ( Photo )
Quantity : 1 Price : £365,000 Mill Floor
Year 2005
consisting of :
- Dosing unit
- STAREX 800/75 Extruder
- 1 Chiller 2 cylinders
- 1 Oven +/- 5 m
- 1 Chiller 6 Cylinders (Stretcher)
- 1 Oven +/- 4 m
- 1 Chiller / Stretcher 4 cylinders
- 1 BARMAG Winder Type ATW 250, 2 x 20 spindles, traverse 10" cylindrical
- 1 BARMAG 2 X 1 Twister Type DD 2000/GT, 2 x 8 spindles, traverse 10"
can dia. 300 mm, height 250 mm
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA30/240610-23*
AA10/071209(-)
*****************************************************************************************************************************************************
BARMAG EXTRUSION LINE 1995 ( Photo )
Price : EUR 110,000 Mill Floor
° BARMAG draw-texturizing machine STM 16 from 1995
° 6 positions/ 2 end vertical construction
° 4 positions running / 2 positions are out of order and were used as spare parts
° 8 spin packs in production / 12 spin packs as back up ( plates with 138 filaments )
° titre range between 1600dtex - 3000dtex ( up to 4000dtex is possible )
° mono colour machine/ 2 positions ( witch means you can produce a different colour on each 2 positions )
° dosing system : colortronic graviblend ( touch screen ) (installed 2007)
° chiller : applicatherm
Price without the colortronic equipment would be EUR 70,000 Mill Floor
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AB22/220210-N
*****************************************************************************************************************************************************
ICBT model FTDT 327 E - double torsion twister & texturiser Twisters ( Photo )
Quantity : 3 Price : -
1 x YOC 1997 and 2 x YOC 2000.
Each of 160 positions, double sided. Computer control
Spindles of double torsion model DTE 140
With heater of temperature 160-240oC
Range of yarns – 50-200 den
Feeding with cops of 3 kgs max weight , length up to 420mm dia 135mm
Delivery biconical (cylinder ) package – 230 mm long
Power installed – 45 KVA
Voltage 380V, 50Hz
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA23/140110(-)-
*****************************************************************************************************************************************************
BCF-Filament-Extrusion-Line 1998 ( Photo )
Quantity : 1 Price : EUR 170,000
Fabr. Plantex
Year : 1998
for Polyamid and Polypropylen 1000-6000 dtex
in 3 colours
alternative 2 or 1 colour solution dyed
production 150 – 288 kg/h
with 12 threadlines for 1000-3000 den
6 threadlines for 3000-6000 den
filamentrange 15 to 25 den/filament
Plant features :
3 Extruders
1 Spinnhead
9 Spinningpumps
3 Spinning positios
12 Spinning packs
36 Spinnerettes
Godets :
Pre-tension godets 1 motorised roll with 1 idle roll per spinning position
Slow drawing godets 1 motorised heated roll with 1 idle roll per spinn. pos.
Fast Drawing godets 2 motorised heated rolls per spinning position
Take-up feeding godets 1 motorised roll with 1 idle roll per winder (2 ends)
Maximum-speed : 3.000 m/min
Texturising system:
Texturising positions : 3
Texturisers : 12 (4 each texturising position)
Cooling drums : 3 (4 ends each)
Interlacers : 6 (2 ends each)
Winders : 6
Maximum speed : 3.000 m/min
Bobbins : 2 per winder
Winding tube I.D. 73 mm
Winding tube O.D. 79 mm
Winding tube length 290 mm
winding traverse stroke 250 mm
Bobbin max. diameter 360 mm
Bobbin max. weight 4,5 kg
good condition, still running.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA03/140410-0*
AA03/290110(YLIV-E )
AA42/280909(RPIV-EF)
*****************************************************************************************************************************************************
Extrusion line for BCF AUSTROFIL ( Photo )
Quantity : 1 Price : EUR 660,000 FCA
Monocolour type BCF 4x2
year of construction 2004
suitable for 1100 dtex - 3500 dtex
in very good condition, approx. 22000 working hours
- Max output (depending on the yarn-titer, dpf, yarncount etc.) 200 kg/h
- Material PP MFR 10 -27 G/10min
Single screw extruder
- Screw dia 90 MM
- Screw length 28 D
- Screw speed max 160 Min -1
- Engine power 80 KW
- Drive system AC engine
- Screw/cylinder material Nitride steel alloy
- Number of heating zones (cylinder) 4
- Total heating capacity 42 kW
Spinning unit
- Number of double spinning pumps 4
- Performance of double spinning pump 2x12 ccm/U
- Number of spinning packages 8
Cooling unit
- Horizontal zones 3
- Vertical zones 4
Stretching unit
- Number of stretching units and texturing units 4
- Diameter of godets 160 mm
- Stretching ratio Can be variably adjusted
Winder
- Number of winders 4
Application of spinning preparation
- Recommended spinning preparation (Zschimmer und Schwarz) Fasavin 2763
- Schill +Seilacher Limanol C167
Electrical data
- Total connected load of the line approx. 400 kW
- Average power consumption during the production 160 kW
Compressed air
- Average consumption of compressed air 700 Nm3/h
- Max consumption of compressed air 1200 Nm3/h
Water cooling device
- Cooling performance 88.5 Kcal/h
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA07/291110-N
AA44/040510(SPIV-EM)
*****************************************************************************************************************************************************
BARMAG Tri –Kolor Spetex STM 16/3/3 Extruding line ( Photo )
Reduced Price :EUR 155,000 FCA
Quantity : 1 Price : EUR 185,000 Mill Floor
Barmag type „Tri –Kolor Spetex” model STM 16/3/3 line for PP texturised yarn
Yarn Production : dtex 1000 – 3000 Yarn
production – YOC 1989 refurbished in 1995
Composition:
- 3 screw extruders with electric heating model 7E4/30D (- dia 75 mm
- 3 colour dozing arrangements type E4-25/102-6P
- 6 filters for liquid PP
- 3 pumps
- 6 spinnerets (spinning nozzles)
- 1 waxing arrangement (for continous filament yarn)
- spinning unit of 6 positions model STM 16 (3 positions are from YOC 1995) On each position there is installed texturing arrangement
Barmag (control panel STM16 50/9523)
- control panels
- oven for spinnerets burning out - SCHWING model 2430ST
- ultrasound cleaning arrangement for spinnerets
- heting arrangement for spinnerets type TO-350/05
- Water freezing attachments
Media consumption:
- compressed air - 2000 m3/h
- electric power installed – 900 kW
- surface necessary – about 460 sq. meters
- Practical output – 160 tons of texturized yarn BCF per month.
Output – 160 tons of texturised BCF yarn per
The line is complete and still on mill floor. Excellent condition
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA44/150410-1
AA23/280909(-)
*****************************************************************************************************************************************************
Filteco BCF Extrusion Line ( Photo )
Reduced Price : $ 225,000 Mill Floor
Quantity : 1 Price : $ 545,000 Mill Floor
six position Filteco bcf line.
In the past year it has produced nylon 6, solution dyed polyester, and dyeable polyester. Previously it has produced polypropylene bcf.
It was manufactured in Year 2001 and installed early in Year 2002.
It is capable of producing three color yarns or single color yarns.
The line includes batch polymer dryers required for nylon 6 and polyester polymers.
There are three 50mm extruders, 30:1 L/D, with Doteco gravimetric polymer feeds on each extruder, 22 Kw main motors with inverter drives,
four heating zones on the extruder barrel and one on the barrel exit, bottom loading spin beam with dedicated electric boiler for DowThern
type heating fluid, cross flow quench cabinet with dedicated chiller, finish application system, heated draw godets, texturing jets, cooling
drum, six auto change Winco Model 3001 winders with carpet tube take-up, and a complete electrical control system.
Voltage is 480 volts/3 phase/60 cycles.
The line is currently operating on a 24/7 basis with one operator.
Output over the past several months producing nylon 6 and polyester(PET), running 1400 and 1500 denier single color bcf yarns has
averaged approximately 5,500 pounds per 24 hours, which corresponds to an annual capacity of over 1.900 million pounds per year on a 50
week year.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA12/070510-5
*****************************************************************************************************************************************************
PP / PE Flat Yarn Complete Line ( Photo )
Quantity : 1 Line Price of the Line : -
PP(Poly-Propylene) / PE(Poly-Ethylene) Flat Yarn Extruding and Winding Machine
Spl. of Winder : Total:186 spl. , RH:78 spl. , LH:78spl. + 30 spl. Extension
Production Capacity :5,000~6,000 kg / 24hr. Day
Brand : DaeHeung Korea
Composed of :
- Chip Mixer, Reserver
1 ton, circular
Dec. 2009
by Hopper Load, almost brand new.
- Loader
by air suction & Blowing Piping
Dec. 2009
3 HP
- Extractor
Screw:90mm dia..
1990
Electrical Heating
DC Motor 75HP
1990
with Controller
- T-Dice
Single Type
Dec. 2009.
PP/PE Sheet , Ageing , Water Cooling , almost Brand New
- Selvedge Cutter
with re-cycling device
Dec. 2009.
- Yarn Cutter
Heating Plate, Drawing R/O
Dec. 2009.
- 1st Drawing Section
Heating Plate, Drawing R/O
Dec. 2009.
almost Brand new condition
- 2nd Ironing Section
Dec. 2009.
almost Brand new condition
- Waste Re-Cycling Device
Dec. 2009.
almost Brand new condition
- Winder
156+30 Spl. ,
Driving by Torque Motor , Individual.
1990
0~15kg. About 0.5HP/spl., 0-1Amp. Package :4~5kg.
- ETC
all lot : 3.5 X 40'HQ , Space : 10mX35Meter , Power : approx. 150KW
The Condition of the machine is excellent condition , hard to get this kind of level at the moment.
Status : recently stop in Floor, Power is connected, all motors can be test running and checking.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA81/300410-N
*****************************************************************************************************************************************************
RPR 3SDS ( Photo )
Quantity : 3 Unit Price : EUR 80,000 Mill Floor
All 3 Machines together : EUR 200,000 Mill Floor
Serial No.: 5306-5307-5308
Year : october 1997
Technical dates for one texturing machine in unit :
Dimension for one unit :
Length : 16 870mm
Width : 6 400mm
High : 5 205mm
Machine positions:
All poz.: 10sec. X 8pos./sec. =80poz.
Length of poz. : 1 520mm
Hitting system :
Prim. hitting temperature : 160-250°C
All hit. sys. : 2hit./sec. X 10sec. = 20hit.
Hit. sys. power : 20hit. X 3kW = 60,0kW
Seco. hitting temperature : 140-240°C
All hit. sys. : 1hit./sec. x 10sec. = 10hit.
Hit. sys. Power : 10hit. X 1.6kW 16,0kW
Main motor : 1 X 7,5kW + 4 X 5,5kW 29,5kW
Servo motors “discs” : 80 X 0,14Kw 11,2kW
Monomer fan : 5,0kW
Vacuum pump : 7,0kW
Max. working power : 128,7kW
Average working power : 70% X 128,7kW 90,0kW
One unit (47/48) or (49/50) or (51/52)
Max. working power. X 2 257,4kW
Average working power : 70% X 257,4kW 180,0kW
Position = poz., Section = sec., Position = pos., Hitting = hit., System = sys., primary = prim.,
secondary = seco.
machines are excellent and "ready to be start up" in order to show in running conditions to the potential customer .
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AB24/180510-4
*****************************************************************************************************************************************************
Barmag AFK V/HTI ( Photo )
Quantity : 1 Price : EUR 160,000 Mill Floor
Yom 1997
216 positions
Spindles 1/5/1
Tanglelacing prepared
Without twister
Unitens 6.6
Circular creel
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
AB01/070610-N
*****************************************************************************************************************************************************
TEXTURIZING MACHINES MURATA YEAR 1998
Quantity : 2 Unit Price : EUR 115,000 C&F
make of MURATA TYOE 33J
year 1998
MACH CRIMPER
length 17,290 x 10,152 x 3,90 mtr hight with each of 2 side each 108 position
each machine 216 positions
speed max 1500 m/min
with MURATA creel gauge 450 mm
turning creel
yarn feeding from creel to machine by tubefeeding
cutter for yarn original Murata
delivery position No. 1 pressure roller by Murata
1st heater electric heated with open heating unit type HTI
2 heating zones of each 100 cm
heating zone 2, 70 cm,
cooling rail by fan cooling at length of 110 cm
spindelaggregat by belt,
yarn thread control device Murata
delivery position No. 2 with pressure roller
crimper unit with tubefeeding system on TEMCO JETS
fitted to the central tubefeeding system with control
delivery unit 2 with pressure roller device
heating unit covered heating channel diphylheated length 105 cm with turningtubes
delivery position No. 3 with pressure roller
preparation system connected to central tube feeing
automatic doffing device
yarn thread suction device internal in machine
avivage suction device centralized
computersystem UPMS
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AB05/070610-N
*****************************************************************************************************************************************************
Filteco BCF Fiber Extrusion line ( Photo )
Quantity : 1 Price : EUR 130,000 Mill Floor
Manufacturer:Filteco
Type:BCF Fiber Extrusion line
Year:1997
Serial:60152
6 yarns BCF line
BCF 1300 to 3600dTex
Output up to 4T per day
Possibility to produce 2 colors parallel
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AB25/160610-20
*****************************************************************************************************************************************************
RIETER BCF EXTRUSION LINE
Quantity : 1 Price of the line : EUR 345,000 Mill Floor
Type JO/10
Year 1996
Single Color PP BCF Yarn with 2 Ends
2 Heads automatic Winders
1 Extruder, dia. 120 mm
with Dosing System Color
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA02/230610-N
*****************************************************************************************************************************************************
POLYPROPYLENE BCF CARPET YARN PRODUCTION MACHINE(Photo)
Quantity : 1 Price : $ 400,000 Mill Floor
Year : 2003 - 2004
Brand : Plantex + Rieter + Colortronic
Output : 1200-3000 dtex Polypropylene BCF yarn
Speed : Winder speed maximum 3500 m/min
Capacity of the machine : Output of each unit as follows :
1600 dtex 2300 kg / day
2000 dtex 2600 kg / day
2500 dtex 2800 kg / day
Raw Material : Polypropylene
Spinfinish oil
Masterbatch
Room Conditions : Temperature 10o C – 30o C
Rate of relative moisture 60% - 80 %
Power supply changing , Frequency ± 1%
Voltage ± 5%
The machine has 2 unit and each unit has following:
1 Feeding and Dosing Units ( Colortronic )
1 Extruder
1 Oil Tank
2 Metering Pump
1 Spin Pack
1 Cooling Cabinet
1 Cooling Station
1 Air Channel
1 Spinfinish application set
2 Pretension Cylinder and Separation Cylinder
2 Heated Godet ( Low godet )
4 Heated Godet ( Speed godet )
2 Double Bulking Jet System ( Each unit has 4 yarn , 2 units 8 yarns )
2 Cooling Drum has Double Chanel and Vaccum
2 Radial Fan ( Cooling drım vaccum fan )
2 Intermingled Cylinder and Separation Cylinder
2 Intermingled Unit has Double channel , Sound Isolation Cabinet
Winder with aoutomatic cone converter ( 2x250 )
1 Central PLC Control System, Electric – Electronic supplies , AC Drivers and Display Unit
1 Platform and stairs
1 Air gun , SAS Principal
2 Fiber By-Pass Unit, SAS Principal
2 Pressed Air Heating Unit , SAH Principal
2 CD300 Rieter Winders
1 Set spare spin pack
1 Set accesories , aparatus for spinnerets
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AB35/100810-6
*****************************************************************************************************************************************************
Neumag Extrusion Line
Quantity : 1 Price : -
Year : 1999
FDY (CF) / POY line for the production of multi filament yarn based on polypropylene
6 position machine - each position can be set up individually. The Air Quench and diphyl can be adjusted for 3 positions. On each position
both FDY (CF) or POY yarn can be produced.
6 threads per position
Standard count (FDY) : 300/80 den
Standard count (POY) : 240/40 den
The speed depends on the concentration of colouring
Extrusion equipment :
6 volumetric measuring devices with each 3 com ponents (PP, 2 x masterbatch)
6 extruders with a capacity of each 50 kg/hour - 30 L/D, AC, inverter operated
Diameter of the extruder ca 50 mm
Drive power ca 22 kW, heating power ca. 4 x 5 kW
12 spinning pumps
72 spinnerets 145 mm
48 spinnerets 300/80 den, cross section : trilobal for FDY
24 spinnerets 240/40 den, cross section : round for POY
1 Vacuum station for the setup of the temperature for each diphyl line, per 3 positions
2 Diphylheaters
6 Air Quenches
Yarnguides
Jets - Heberlein and Temco
2x2 heated godets, length 300 mm
Temperature : 140 °C
1 cold godet = chrome
6 winders with automatic doffing, yarn guided by wings
cones of 170 mm - maximum diameter of the bobbins = 400 mm
Fully equiped with a process control system with historical data
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AB09/300810-N
*****************************************************************************************************************************************************
False Twist Texturing machines
ICBT false twist texturing machine
Quantity : 1
FTF12E2AD - 96 positions (1999) - 2 sides of 48 positions
ICBT false twist texturing machine,
Quantity : 1
FTF12E2AD - 16 positions (1997) - 2 sides of 8 positions
machines with 2 heaters
disc size 9 mm
temperature texturing heater 170 °C
temperature fixation heater 250 °C
maximum mechanical speed 1200 m/min
All machines are in good working condition
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AB09/300810-N
*****************************************************************************************************************************************************
FOY / POY spinning line Barmag
Quantity : 1 Price : EUR 1,200,000 Mil floor
Year : 1996/2002
FOY / POY spinning line Barmag
year 1996/ Revisied in Year 2002
each line with following specs:
1 extruder / 2 spinning heads / 12 spinning positions / 6 ends per spinning position / 6 spin pack per spinning position / 12 quenching system /
1 spin-finish pump per position / 6 TCS tubes per position / 12 craft winders per machine
Max. production capacity of 1 extruder is 3400 kg/d.
Each extruder, type 9E10, is equipped with: 6 heating zones,temp. range 2500 – 3100C, Screen quenching chambers
Spinning heads equipped with spinning pumps and spin packs
12 spinning positions, each with 6 points
CPF central filter
Extruders equipped with “a hot tubes”, max. temp. 2000C., spin finish application jets and interlacing jets.
In each position a birotor CRAFT WINDER 6/900 is installed, max. spinning speed 5500 m/min.
The manufactured count range is 33 – 76 dtex.
Possibility to control individual positions.
Machines have hot tube but not hot godged roller.
Additional description:
- spin pack - screen filtration with cup,spinnerette dia.: 100 and 100/70mmm, max.melt pressure 300 bar
- spinnerette: 100mmm - 72 wholes 0,17x0,51
48 wholes 0,2 x0,4
100/70mm - 24 wholes 0,23x0,46 and 0,27x0,54
36 wholes 0,23x0,46
48 wholes 0,2 x0,4 and 0,17x0,34
- spinning melt pump: 6-fold planetary gear pump, capacity 6x1,8 ccm/rew
- spin finish pumps: 1 per spinning pos. capacity 6x0,08 ccm/rew
- extra spares: 3 small small gallets,3 big gallets, 4 spool handles, 1 wind-up machine, 30 bi-rotors
- FOY-POY line are without chips conveying and dryers
- quenching system: cross flow quench with air supply valve blowing length approx. 1000mm
Production data:
Machines actual running speed was 4500 m/min
Due to machine wide production range (extruder's capacity from 2200 kg/day to 16000 kg /day), the max. production rate for FOY yarn with
speed 5250 m/min is:
- 40 denier – 3000 d/d – 46 TON/AY
- 3500 d/d 53 TON/MONTH
- 4000 d/d 61 TON/MONTH
- 4500 d/d – 69 TON/MONTH
- 70 denier – 3000 d/d – 80 TON/MONTH
- 3500 d/d – 94 TON/MONTH
- 4000 d/d – 107 TON/MONTH
- 4500 d/d – 120 TON/MONTH
- 140 denier – 3000 d/d – 160 TON/MONTH
- 3500 d/d – 188 TON/MONTH
- 4000 d/d – 214 TON/MONTH
- 4500 d/d – 240 TON/MONTH
- 300 denier – 3000 d/d – 320 TON/MONTH
- 3500 d/d – 376 TON/MONTH
- 4000 d/d – 428 TON/MONTH
- 4500 d/d – 480 TON/MONTH
change of screw to extruder is necessary
Average electricity consumption per ton of FOY yarn at a rate of 3T/day for one extruder is 2187 kWh.
Condition: stopped on mill floor, very good condition - ready to work.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AB38/111010-6
*****************************************************************************************************************************************************
PET POY line make Barmag (Photo)
Quantity : 1 Price : EUR 460.000, C&F
year : 2002
for Polyester yarns ion the range from 78 dtex, 110 dtex and 167 dtex
consisting of
chips dryer and crystallizer, make Viba Siat/ Italy, capacity from 120 up to 260kg/h
extruder Barmag E10E, 24 D, screw diameter 105 mm, with measuring head
throughput from 120 up 270 kg/h
CVF-Filter
Spinning beam SP 56
Spinnerets diameter 100mm number of wholes 36,96 and 144 round
Planetary spinning pumps with throughput 3.5 cm³ per rotation.
Spin finish in the quenching by oiling jets
1 cold godet for S-turn
Entangling device with Heberlein Polyjets PP 200
6 Barmag birotor winders type ACW6T-1200, 8 bobbins each
Total 48 threadlines
Final bobbin 16,9 dm³ with max. diameter 440 mm
Operating speed 3.200 m/min.
Max mechanical speed 6.000 m/min
Dinyl heating system
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA83/081210-N
*****************************************************************************************************************************************************
YARN DYEING
Quantity : 1 price: EUR 180 000 Ex. Works
Complete yarn dyeing or bleaching plant for bobbins or loose material
Excellent condition, comprising:
THIES Autoclaves
Quantity : 2
year 1996,
Type 1250 KB,
capacity 300 kg each,
dia. 1250 mm
height 1,40 m,
programming T737,
each 2 bobbin carriers and 2 loose material carriers
THIES Autoclave
Quantity : 1
year 1996,
Type 700 KB,
capacity 90 kg,
dia. 0,70 m,
height 1,40 m
Programming 737,
with 2 bobbin carriers and 2 loose material carriers
THEN Autoclave
Quantity : 1
year 1988,
Type COMAT HR 50/N,
capacity 22 kg
Programming 737,
with 2 bobbin carriers and 2 loose material carriers
WOLF high temperature sample Autoclave for bobbins
Quantity : 1
Type 4+5KH,
Year 1985
Capacity 5 cones,
dia. 250 mm,
programming SETEX 505
MUHLMANN Hydro-extractor
Quantity : 1
year 1995,
dia. 1,175,
capacity 450 kg
POZZI loading press for loose material,
Quantity : 1
Type IP,
year 1996
KOHL loading press for bobbins
Quantity : 1
year 1996
Type 502,
STALAM high frequency dryer
Quantity : 1
year 1995,
2 x 30 kW,
with metal detector
For loose material and cones,
fed by GAVAZZI hopper feeder (for loose material),
year 1996, Type CTN, delivery with suction (for loose material)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA10/040411-1
*****************************************************************************************************************************************************
BCF extrusion spinning line Barmag STM 16
Quantity : 1 Price : EUR 245,000 C&F
Year 1991
The machines consist of :
3 Extruder 7E4/33D with 3DD-mixer for PP
3 sidestreamextruder with dosing pump for masterbatch dosing
1 Spinningmachine SP18/3 with distribution pipes, spinning oil application, spin pump drives, HTM heating system, cross flow quench, incl.
insulation and stairways
6 spinning pumps ZP640 with 2 X 20cc/rev
12 spinpacks with plates trilobal shape
1 Trio of cold godets between spinning and texturing unit
6 draw texturing positions for 12 ends with open texturing jets
6 Barmag SW4R/2 winders for BCF yarn (tube 73 mm diameter and length 290 mm)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA83/180411-2
*****************************************************************************************************************************************************
Barmag BCF extrusion spinning line STM 16
Quantity :1 Price : EUR 285,000 C&F
Year 1994
The machines consist of :
4 Extruder 7E4/33D with 3DD-mixer for PP
4 side stream extruder with dosing pump for masterbatch dosing
1 Spinning machine SP18/4 with distribution pipes, spinning oil application, spin pump drives, HTM heating system, cross flow quench, incl.
insulation and stairways 8 spinning pumps ZP640 with 2 X 20cc/rev
16 spinpacks with plates trilobal shape
1 Trio of cold godets between spinning and texturing unit
8 draw texturing positions for 12 (16) ends with open texturing jets
8 Barmag SW4R/2 winders for BCF yarn (tube 73 mm diameter and length 290 mm
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA83/180411-2
*****************************************************************************************************************************************************
STP spinning plants mod. CF
Quantity : 2 Price : EUR 63.000 CFR
Year : 1996
for production of polypropylene multifilament yarns,
Each plant consists of 1 single independent spin-draw position equipped with 2 winders mod. TR5,
each with 2 tubes 285 m.,
manual doffing,
production 33 -39 kg/ h
Production data:
Product: FDY of PP, intermingled, wound on cylindrical spools
Counts: from 150 to 2000 den
Filaments section: full and hollow section
Filaments: n. 64 n. 96 n. 128
Bobbins: cylindrical, max. diam. 300 mm.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA10/240511-N
*****************************************************************************************************************************************************
BARMAG TEXTURISING MACHINE
Quantity : 1 Price : EUR 170,000 mill floor
Year : 1993
model FK 6M-900 ,
216 positions,
discs PU type,
216 intermingle nozzles,
hetar 1st – 263 cm long,
heater 2nd – 144 cm long,
max dia of feeding package – 435 mm,
creel for 432 packages.
Yarn range for POY 138dtex-566dtex
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AA23/190711-13
*****************************************************************************************************************************************************
Barmag STM 16 BCF PP plant
Quantity : 1 Price: 400 000,00 Euros
Year of construction: 1996
Machine type Tri-ply
Barmag STM 16
Type: Barmag Viercolor
Model: STM16/4-8 MOD-Viercolor
Denier range: from 1600 to 5000 dtex
Production capacity: 240 ton (4 extruders each 60 ton)
Extruders type: 4 extruders Type: 7E8/30D
Winders quantity: 8 (original ones) + 2 spare ones
Winders type: Barmag SW4RZ (number of positions: 16)
Dozing System : Colortronic / Viercolor/ Synchroblend M
Thermal System: DIENES Regulation
Electronic Heating System Dowtherm
Including:
Oven, Chiller YORK, Triobal spinnerets in different sizes, new texturizing nozzles
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AB87/111102-13
*****************************************************************************************************************************************************
NEUMAG BCF LINE
Quantity : 1 Price : EUR 400,000 C&F Bandar Abass
Year : 1998
Manufacturer: NEUMAG
Neumag Monocolor BCF Line
2 yarn Ends for each position
3 Extruders
Volumetric Dosing on each extruder
Texturizing NPT 3.500
Pitch 1000 mm/Position
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
*AB74/191211-2
*****************************************************************************************************************************************************
|
|
|
|
| |
|
|
|
|
Previous Page
|
Next Page
|
<< Page 1 >>
|
|
|
|
|
|
|
|
|
|
|
|
